Next Previous Contents

7. Motherboards

The people who answered were using the following boards:

7.1 ASUS

  • Ruediger.Funck@Physik.TU-Muenchen.DE - successful.
  • strauss@dagoba.escape.de - half-successful, works, but...
  • krypton@netzservice.de (Ulrich Teichert), - successful.
  • heinrich@zsv.gmd.de - successful
  • CARSTEN@AWORLD.aworld.de - successful
  • egooch@mc.com - successful - but trouble with the serial port
  • archie@CS.Berkeley.EDU and his friend - successful after solving IDE-puzzle
  • Lars Heinemann (lars@uni-paderborn.de) successful
  • Michael Will (Michael.Will@student.uni-tuebingen.de) - successful.

7.2 Micronics P54i-90

root@intellibase.gte.com succesful bill.foster@mccaw.com successful karpens@ncssm-server.ncssm.edu successful

7.3 SA486P AIO-II

ah@doc.ic.ac.uk successful

7.4 Sirius SPACE

hi86@rz.uni-karlsruhe.de - successful

7.5 Gateway-2000

kenf@clark.net - no problems except the soundcard he tries to swap dmarples@comms.eee.strathclyde.ac.uk - successful, but... robert logan (rl@de-montfort.ac.uk) - flawless. James D. Levine (jdl@netcom.com) - flawless.

7.6 Intel-Premiere

grif@cs.ucr.edu - successful jeromem@amiserv.xnet.com - successful demarest@rerf.or.jp - successful (Premier-II)

7.7 DELL Poweredge SP4100 gbelow@pmail.sams.ch - successful

7.8 DELL OptiPlex Gl+ 575 torsten@videonetworks.com - successful when turning off plug and play

7.9 Comtrade Best Buy PCI / PCI48X MB Rev 1.0

tldraben@Teleport.Com - "Works, I believe it has buggy Saturn chipset. I would also like to add: I strongly recommend not buying from Contrade. Their service is horrible. "

7.10 IDeal PCI / PCI48X MB Rev 1.0

tldraben@Teleport.Com - "Did not work with PCI48X motherboard"

7.11 CMD Tech. PCI IDE / CSA-6400C

tldraben@TelePort.com - "Works"

7.12 GA-486iS (Gigabyte)

Stefan.Dalibor@informatik.uni-erlangen.de - success with problems.

7.13 GA-586-ID (Gigabyte) 90 Mhz Pentium PCI/EISA Board

kkeyte@esoc.bitnet - succesful

7.14 ESCOM 486dx2/66 - which board?

Works perfect except the ftape-streamer (archive)

7.15 J-Bond with i486dx2/66

Drew Eckhardt (drew@kinglear.cs.Colorado.EDU) uses Diamond Stealth 64 VRAM with 4M of memory (964 based). It works great, he usualy runs it at 1024x768 72hz in 32bpp; 16 and 8bpp also work. He needed to get the X311u2S3.tgz server from ftp.xfree86.org; people with 968 based Diamond boards will definately need to do this.

7.16 super micro 011895 03:50 SUPER P54CI-PCI rev 1.3 (Opti)

Manuel de Vega Barreiro

  • board super micro 011895 03:50 SUPER P54CI-PCI rev 1.3
  • Opti chipset: 82c557,82c556,82c558,82c621.
  • 4 PCI, 4 ISA Slots (4x16 Bit)
  • ZIF Socket for CPU (120,100,90,75 mHz)
  • 4 72 pin-SIMMs (max 128Mb)
  • cache 256,512,1024 Kb L2-cache
  • Ami WinBIOS in Flash-Eprom (101094-VIPER-P)
  • onboard: EIDE for 4 drives
  • Pentium with 90Mhz, 8M (now 16M) RAM and 256K L2-cache.
  • 1 maxtor 540 Mb, 1 st3122A 1Gb
  • Number Nine 9GXE64pro with 2Mb
  • Sound blaster 16 + cdrom Matsushita
  • 17" microscan 5ep ADI monitor
I run linux 1.1.57 (now 1.2.1) without problems. dosemu0.53 work fine (com. software like kermit and xtalk) XFree86 3.1 at 1024x768 resolution


Next Previous Contents
Copyright © 2010-2024 Platon Technologies, s.r.o.           Home | Man pages | tLDP | Documents | Utilities | About
Design by styleshout