13.7. Splitting a volume group

There is a new group of users "design" to add to the system. One way of dealing with this is to create a new volume group to hold their data. There are no new disks but there is plenty of free space on the existing disks that can be reallocated.

13.7.1. Determine free space


# pvscan 
pvscan -- reading all physical volumes (this may take a while...)
pvscan -- ACTIVE   PV "/dev/sda"  of VG "dev"   [1.95 GB / 0 free]
pvscan -- ACTIVE   PV "/dev/sdb"  of VG "sales" [1.95 GB / 1.27 GB free]
pvscan -- ACTIVE   PV "/dev/sdc"  of VG "ops"   [1.95 GB / 564 MB free]
pvscan -- ACTIVE   PV "/dev/sdd"  of VG "dev"   [1.95 GB / 0 free]
pvscan -- ACTIVE   PV "/dev/sde"  of VG "ops"   [1.95 GB / 1.9 GB free]
pvscan -- ACTIVE   PV "/dev/sdf"  of VG "dev"   [1.95 GB / 1.33 GB free]
pvscan -- ACTIVE   PV "/dev/sdg1" of VG "ops"   [996 MB / 432 MB free]
pvscan -- ACTIVE   PV "/dev/sdg2" of VG "dev"   [996 MB / 632 MB free]
pvscan -- total: 8 [13.67 GB] / in use: 8 [13.67 GB] / in no VG: 0 [0]
          
We decide to reallocate /dev/sdg1 and /dev/sdg2 to design so first we have to move the physical extents into the free areas of the other volumes (in this case /dev/sdf for volume group dev and /dev/sde for volume group ops).

13.7.2. Move data off the disks to be used

Some space is still used on the chosen volumes so it is necessary to move that used space off onto some others.

Move all the used physical extents from /dev/sdg1 to /dev/sde and from /dev/sdg2 to /dev/sdf


# pvmove /dev/sdg1 /dev/sde
pvmove -- moving physical extents in active volume group "ops"
pvmove -- WARNING: moving of active logical volumes may cause data loss!
pvmove -- do you want to continue? [y/n] y
pvmove -- doing automatic backup of volume group "ops"
pvmove -- 141 extents of physical volume "/dev/sdg1" successfully moved

# pvmove /dev/sdg2 /dev/sdf
pvmove -- moving physical extents in active volume group "dev"
pvmove -- WARNING: moving of active logical volumes may cause data loss!
pvmove -- do you want to continue? [y/n] y
pvmove -- doing automatic backup of volume group "dev"
pvmove -- 91 extents of physical volume "/dev/sdg2" successfully moved
          

13.7.3. Create the new volume group

Now, split /dev/sdg2 from dev and add it into a new group called "design". it is possible to do this using vgreduce and vgcreate but the vgsplit command combines the two.


# vgsplit dev design /dev/sdg2
vgsplit -- doing automatic backup of volume group "dev"
vgsplit -- doing automatic backup of volume group "design"
vgsplit -- volume group "dev" successfully split into "dev" and "design"
          

13.7.4. Remove remaining volume

Next, remove /dev/sdg1 from ops and add it into design.


# vgreduce ops /dev/sdg1
vgreduce -- doing automatic backup of volume group "ops"
vgreduce -- volume group "ops" successfully reduced by physical volume:
vgreduce -- /dev/sdg1

# vgextend design /dev/sdg1
vgextend -- INFO: maximum logical volume size is 255.99 Gigabyte
vgextend -- doing automatic backup of volume group "design"
vgextend -- volume group "design" successfully extended
          

13.7.5. Create new logical volume

Now create a logical volume. Rather than allocate all of the available space, leave some spare in case it is needed elsewhere.


# lvcreate -L750M -n users design
lvcreate -- rounding up size to physical extent boundary "752 MB"
lvcreate -- doing automatic backup of "design"
lvcreate -- logical volume "/dev/design/users" successfully created
          

13.7.6. Make a file system on the volume


# mke2fs /dev/design/users
mke2fs 1.18, 11-Nov-1999 for EXT2 FS 0.5b, 95/08/09
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
96384 inodes, 192512 blocks
9625 blocks (5.00<!-- ) reserved for the super user
First data block=0
6 block groups
32768 blocks per group, 32768 fragments per group
16064 inodes per group
Superblock backups stored on blocks: 
        32768, 98304, 163840

Writing inode tables: done                            
Writing superblocks and filesystem accounting information: done
        

13.7.7. Mount the new volume


# mkdir -p /mnt/design/users mount /dev/design/users /mnt/design/users/
        

It's also a good idea to add an entry for this file system in your /etc/fstab file as follows:


/dev/design/user
/mnt/design/users   ext2    defaults        1 2
          

Copyright © 2010-2024 Platon Technologies, s.r.o.           Home | Man pages | tLDP | Documents | Utilities | About
Design by styleshout