5.2. Testing internal MASQ client PC connectivity

  • Step Two: Testing internal MASQ client PC connectivity

    From an internal MASQed computer, try pinging its local IP address (i.e. ping 192.168.0.10 ). This will verify that TCP/IP is correctly working on the local machine. Almost ALL modern operating systems have built-in support for the "ping" command. If this ping doesn't work, make sure that TCP/IP is correctly configured on the MASQed PC as described earlier in Chapter 4 of this HOWTO. The output should look something like the following (hit Control-C to abort the ping):

    ------------------------------------
    masq-client# ping 192.168.0.10 
    PING 192.168.0.10 (192.168.0.10): 56 data bytes
    64 bytes from 192.168.0.10: icmp_seq=0 ttl=255 time=0.8 ms
    64 bytes from 192.168.0.10: icmp_seq=1 ttl=255 time=0.4 ms
    64 bytes from 192.168.0.10: icmp_seq=2 ttl=255 time=0.4 ms
    64 bytes from 192.168.0.10: icmp_seq=3 ttl=255 time=0.5 ms
    ^C
    
    --- 192.168.0.10 ping statistics ---
    4 packets transmitted, 4 packets received, 0% packet loss
    round-trip min/avg/max = 0.4/0.5/0.8 ms
    ------------------------------------

Copyright © 2010-2024 Platon Technologies, s.r.o.           Home | Man pages | tLDP | Documents | Utilities | About
Design by styleshout